Watch the lesson
Trending or Ranging? Reading Volatility with the Last Closed 4H ATR (11:24). Also on the free lessons page, with chapters. Education only. The video explains how the rules work; it is not personal advice.
What ATR measures
True range for a candle is the largest of three distances: high minus low, high minus the previous close, and the previous close minus low. The previous-close parts catch gaps. ATR(14) is a smoothed average of the last 14 true ranges. It measures how far price typically travels per candle, in price units. It says nothing about direction.
The basic formula
- Long: stop = entry − (multiplier × ATR)
- Short: stop = entry + (multiplier × ATR)
Illustrative example: entry 1.2750, ATR(14) = 0.0040, multiplier 1.5. Stop = 1.2750 − 0.0060 = 1.2690.
Choosing a multiplier
| Multiplier | Character | Trade-off |
|---|---|---|
| 1.0 × | Tight | Normal candle-to-candle noise often reaches it |
| 1.5 × | Moderate | A common middle ground |
| 2.0 × | Wider | Survives more noise; smaller position for the same risk |
| 2.5 to 3.0 × | Wide | Used for trend-following and volatile markets like gold |
A wider stop isn't safer by itself. If you keep the same position size, a 3 × ATR stop risks twice as much as a 1.5 × one. The point of the multiplier is to place the stop beyond normal noise, then size the position so the money at risk is what you intended.
Which timeframe's ATR?
ATR on a 5-minute chart can swing wildly between the Asian session and the London open (around 6pm to 7pm Sydney time, depending on daylight saving). Using it for a stop means the stop width depends heavily on when you look. Two alternatives:
- Use a higher-timeframe ATR, such as the last closed 4-hour ATR. It changes slowly and doesn't spike on a single candle. The video explains this at 2:44.
- Use a longer ATR length on your own timeframe, such as ATR(50), to smooth it out.
Whichever you choose, read it from a closed candle so it doesn't change while you're planning.
ATR plus structure
A purely numeric stop can land in a silly place, for example just above an obvious swing low that many people are watching. A better rule combines the two: place the stop beyond the nearest meaningful swing, then check its distance in ATRs.
- If the structural stop is less than about 1 ATR away, it's probably inside normal noise.
- If it's more than about 3 ATR away, the idea may need a smaller position or a different entry.
Worked example (illustrative numbers)
- Long idea on a 1-hour chart at 2,410.0. The last swing low is 2,401.5.
- Last closed 4-hour ATR(14) = 9.0. 1.5 × ATR = 13.5. ATR stop = 2,396.5.
- Structural stop: a little below the swing low, say 2,400.0 (10.0 away, about 1.1 ATR).
- The ATR stop at 2,396.5 sits beyond the swing low with a buffer. Use it, and size the position for a 13.5 risk distance.
ATR stops vs ATR trailing stops
A fixed ATR stop is set once at entry. A trailing ATR stop follows price, for example staying 2 × ATR below the highest close since entry, and only moves in your favor. Trailing stops suit trend-following; fixed stops suit ideas with a clear structural invalidation. Trend Path draws a volatility-adjusted trailing path if you want to see one on the chart.
Common mistakes
- Using live ATR. It can jump mid-candle, especially on news.
- Same position size with a wider stop. That just risks more.
- Ignoring structure. A stop a few points above an obvious swing low is a common place to get taken out.
- Moving the stop further away after entry. That changes the risk you planned for.
- Using ATR for direction. Rising ATR means bigger candles, not up candles.
Getting the numbers on screen
TradingView's built-in ATR indicator plus the Data Window gives you the values. Smart MACD calculates the last closed 4-hour ATR, a reference stop at 1.5 or 2.0 times it, and a reference target at your chosen R multiple, so you can see the arithmetic without a calculator. The stop and target are references for planning and study, not recommendations.
Frequently asked questions
What is an ATR stop loss?
A stop placed a multiple of the Average True Range away from entry, so it scales with how much the market is moving.
What ATR multiplier should I use for a stop?
1.5 to 2 times ATR is a common middle ground. Tighter stops are hit by normal noise more often; wider stops need a smaller position for the same risk.
Which ATR length is best for stops?
ATR(14) is the default. A longer length, or a higher-timeframe ATR such as the last closed 4-hour, gives a steadier number.
Should I combine ATR with support and resistance?
Many traders do: place the stop beyond the nearest meaningful swing, then check its distance in ATRs to make sure it is outside normal noise.
Does a higher ATR mean price will go up?
No. ATR measures range size, not direction. Rising ATR means larger candles in either direction.
Keep reading
ATR position sizing: keeping risk equal across quiet and busy markets
How ATR position sizing works: the formula, worked examples for forex, gold and indices, and why equal-risk sizing matters.
Risk-reward ratio: the math, the break-even win rate and the limits
How to calculate risk-reward ratio, the break-even win rate for 1:1, 1:2 and 1:3, why R-multiples help, and why a big ratio on paper can mislead you.
How to trade pullbacks in a trend: a five-step checklist
A five-step pullback checklist: confirm the trend, define the zone, wait for a confirmation candle, check the higher timeframe, measure room.
More in ATR and volatility sizing, or browse all guides by topic. Questions? Email contact@brainiosoftware.com.
General information only. This guide is general education, not personal financial product advice or a recommendation to buy or sell anything. Indicator readings, alerts and screener results are not trade recommendations. Examples use illustrative numbers. TradingView is a third-party platform; we are not affiliated with or endorsed by TradingView. Education only. Not financial advice. Trading involves risk of loss. Read the full risk disclaimer.