Watch the lesson
Trending or Ranging? Reading Volatility with the Last Closed 4H ATR (11:24). Also on the free lessons page, with chapters. Education only. The video explains how the rules work; it is not personal advice.
The calculation
- Risk = |entry − stop|
- Reward = |target − entry|
- Risk-reward ratio = reward ÷ risk, written 1:R
Illustrative example: entry 1.0850, stop 1.0820, target 1.0910. Risk = 0.0030, reward = 0.0060, ratio 1:2.
The video above shows the same arithmetic using an ATR-based stop: a reference stop at 1.5 × the last closed 4-hour ATR and a target at 2R (from 4:15).
Break-even win rate
If every loss is 1R and every win is R, you break even (before costs) when the win rate equals 1 ÷ (1 + R).
| Ratio | Break-even win rate (before costs) |
|---|---|
| 1:0.5 | 66.7% |
| 1:1 | 50.0% |
| 1:1.5 | 40.0% |
| 1:2 | 33.3% |
| 1:3 | 25.0% |
Spreads, commissions and slippage push each of these numbers up, and they matter more on small stops.
The part people leave out
Moving the target further away improves the ratio and lowers the break-even win rate, but it also lowers the chance the target is reached before the stop. You don't get the ratio for free. A 1:3 idea that reaches its target 20% of the time is worse than a 1:1.5 idea that reaches it 45% of the time. Which situation you're in can only be learned from records, not from the ratio.
Thinking in R-multiples
Record each closed idea as a multiple of its initial risk. A loss at the stop is −1R. Exiting at 1.6 times the risk is +1.6R. Exiting early at a small loss might be −0.4R. Benefits:
- Results compare fairly across markets and position sizes.
- You can compute expectancy: the average R per idea. Over 50 ideas, an average of +0.15R means the process gained 0.15 times the risk per idea on that sample. A sample, not a promise.
- You can see whether early exits are helping or hurting.
Worked example: a planned idea (illustrative)
- Entry 1.2700. Last closed 4-hour ATR = 0.0040. Reference stop 1.5 × ATR = 0.0060 below: 1.2640.
- 2R reference target = 1.2700 + 2 × 0.0060 = 1.2820.
- The nearest resistance zone starts at 1.2765. Room to resistance = 0.0065, about 1.08R.
- The 2R target sits beyond resistance. Options: accept that the target crosses a level (lower odds), use a closer target near 1.2760 (about 1:1), or wait for price to clear the zone. This is the room check from how to trade pullbacks expressed in R.
Common misuses
- Moving the stop to improve the ratio. A tighter stop that sits inside normal noise makes the ratio look better and the idea worse. Set the stop from structure or ATR first; see ATR stop loss.
- Targets through obvious levels. The ratio ignores what's in the way.
- Ignoring costs on small stops. A 1:2 idea with a spread of 0.2R is closer to 1:1.6 in practice.
- Judging a single trade. One idea at 1:3 that hits its stop says nothing about the method.
- Ratio as a quality score. It's a check on room, not a measure of whether an idea is good.
How it connects to position size
Risk-reward is about distances; position size turns the risk distance into money. Decide the money at risk first, then size the position from the stop distance as shown in ATR position sizing. The ratio doesn't change with size; the money does.
Smart MACD shows a reference entry, an ATR-based reference stop and a target at your chosen R multiple, with percentage distances. These are planning references for study, not recommendations.
Frequently asked questions
How do you calculate risk-reward ratio?
Divide the distance from entry to target by the distance from entry to stop. Entry 100, stop 98, target 104 gives 4 ÷ 2 = 1:2.
What is a good risk-reward ratio?
There's no universal answer. A higher ratio lowers the break-even win rate but targets further away are reached less often. Judge a method by recorded results, not the ratio alone.
What win rate do I need with 1:2 risk-reward?
Above about 33.3% to break even before costs. Spreads, commissions and slippage raise that number.
What is an R-multiple?
A result expressed as a multiple of the initial risk. A full loss at the stop is −1R; a gain of twice the risk is +2R.
Should I tighten my stop to get a better ratio?
Not if it moves the stop inside normal noise. Set the stop from structure or ATR first, then see what ratio the room allows.
Keep reading
ATR stop loss: how to size a stop by volatility
How an ATR stop loss works: the formula, choosing a multiplier, combining ATR with structure, and why a 4-hour ATR is steadier than the chart's own.
ATR position sizing: keeping risk equal across quiet and busy markets
How ATR position sizing works: the formula, worked examples for forex, gold and indices, and why equal-risk sizing matters.
How to trade pullbacks in a trend: a five-step checklist
A five-step pullback checklist: confirm the trend, define the zone, wait for a confirmation candle, check the higher timeframe, measure room.
Browse all guides by topic. Questions? Email contact@brainiosoftware.com.
General information only. This guide is general education, not personal financial product advice or a recommendation to buy or sell anything. Indicator readings, alerts and screener results are not trade recommendations. Examples use illustrative numbers. TradingView is a third-party platform; we are not affiliated with or endorsed by TradingView. Education only. Not financial advice. Trading involves risk of loss. Read the full risk disclaimer.