Watch the lesson
Drawing Clean Support & Resistance Zones (AOI) the Simple Way (8:29). Also on the free lessons page, with chapters. Education only. The video explains how the rules work; it is not personal advice.
What a supply or demand zone is supposed to show
A demand zone marks an area where price previously left quickly upward; a supply zone marks one where price left quickly downward. The idea is that the speed of the departure suggests unfilled interest at that level. You don't have to accept the story about “unfilled orders” to find the zones useful: they mark places where the market previously changed its mind fast, which is worth knowing.
Step 1: Find the departure, not the zone
Start with the move, then work backward. Look for a leg that is clearly larger than the candles around it. A useful test is a move of at least 2 × ATR(14) within three candles. If the move away is ordinary, there's nothing special about where it started.
Step 2: Mark the base
The base is the cluster of small candles right before the departure, usually one to four candles with small bodies. Patterns you'll hear named:
- Drop-base-rally and rally-base-rally: demand.
- Rally-base-drop and drop-base-drop: supply.
If there's no clear base, for example a V-shaped turn with one long wick, use that single candle.
Step 3: Choose the edges
For a demand zone:
- Proximal edge (the one price meets first): the highest body in the base.
- Distal edge (further away): the lowest wick in the base.
Mirror it for supply. Body-to-wick is a common convention because bodies show where candles settled and wicks show the extreme that was tested.
Step 4: Cap the height with ATR
Bases on fast markets can produce zones so tall they're useless. Capping the height at a fraction of ATR keeps zones comparable across quiet and busy markets. The video uses 0.40 × ATR as a default zone height for support and resistance zones; for supply and demand bases, many traders allow up to about 1 × ATR before trimming the distal edge.
Illustrative example: on a 1-hour chart with ATR(14) = 12 points, a base whose body-to-wick span is 30 points is 2.5 ATR tall. Trimming the distal edge to 12 points from the proximal edge gives a zone you can actually plan around.
Step 5: Judge freshness
A zone that has never been revisited is called fresh. Each return uses up some of whatever made the zone interesting, and by the third or fourth visit many traders treat it as ordinary. Count the touches: how many candles traded inside the zone over the last 100 to 200 bars. A high touch count on support usually means the level is well known, which can cut both ways.
Worked example (illustrative numbers)
- On a 4-hour chart, price rallies from 1.3410 to 1.3528 in three candles. ATR(14) = 0.0042, so the move is about 2.8 ATR. Qualifies.
- The base is two small candles before the rally: bodies between 1.3418 and 1.3425, lowest wick 1.3402.
- Demand zone: 1.3425 (proximal) to 1.3402 (distal). Height 0.0023, about 0.55 ATR. No trimming needed.
- Since then, price has returned once and left again. Touch count: one. Still relatively fresh.
Now you have a zone to watch. Whether it's worth acting on depends on the trend, the higher timeframe and the room to the next level, which is the same checklist covered in how to trade pullbacks.
Supply and demand vs support and resistance
They overlap heavily. Support and resistance usually start from swing highs and lows (where price turned); supply and demand start from the base before a strong move (where price left). On many charts they end up in nearly the same place. Our step-by-step ATR support and resistance guide covers the swing-point method.
Common mistakes
- Drawing a zone at every base. Without a strong departure, it's just a pause.
- Zones that are too tall. If the zone is three ATR high, it is not telling you much about where price might react.
- Ignoring freshness. The fifth return to a zone is not the same as the first.
- Treating the zone as a sure thing. Zones fail all the time, especially against a strong higher-timeframe trend. Decide where the idea is wrong (beyond the distal edge plus a buffer) before price arrives.
- Redrawing after the fact. If you move the zone after price reacts, you can't learn whether your method works.
Keeping the chart clean
Many traders end up with fifteen zones on a chart and no idea which matters. Zone Map takes the opposite approach: one support and one resistance zone from the latest confirmed swings, ATR-sized, with touch counts and a rule for when the two zones crowd together. If you trade 5-minute or 15-minute charts, Hourly Zones draws the 1-hour version on your lower chart.
Frequently asked questions
What is the difference between supply and demand zones and support and resistance?
Supply and demand zones start from the base before a strong move away; support and resistance usually start from swing highs and lows. They often land in similar places.
How do you know if a supply or demand zone is strong?
Common clues are a strong departure (for example at least 2 ATR within a few candles), a compact base, and few previous returns. None of these ensures a reaction.
Should the zone be drawn from bodies or wicks?
A common convention is body edge to wick extreme: the proximal edge at the base's body, the distal edge at the wick.
What timeframe is best for supply and demand zones?
Higher timeframes such as 4-hour and Daily produce fewer, more widely watched zones. Lower timeframes produce many more zones and more noise.
When is a supply or demand zone invalid?
Many traders treat a candle close beyond the distal edge as invalidation. Decide the rule in advance and apply it consistently.
Keep reading
When support becomes resistance: role reversal, step by step
Why broken support often acts as resistance, how to tell a real flip from a fake break, and a worked retest example with an ATR-sized zone.
BOS vs CHoCH: break of structure vs change of character
Break of structure (BOS) vs change of character (CHoCH): close-vs-wick rules, pivot length, a worked example and where the labels mislead.
How to trade pullbacks in a trend: a five-step checklist
A five-step pullback checklist: confirm the trend, define the zone, wait for a confirmation candle, check the higher timeframe, measure room.
More in Support, resistance and supply/demand zones, or browse all guides by topic. Questions? Email contact@brainiosoftware.com.
General information only. This guide is general education, not personal financial product advice or a recommendation to buy or sell anything. Indicator readings, alerts and screener results are not trade recommendations. Examples use illustrative numbers. TradingView is a third-party platform; we are not affiliated with or endorsed by TradingView. Education only. Not financial advice. Trading involves risk of loss. Read the full risk disclaimer.